Inhaltstyp
Kategorien
-
Batterieforschung: Erfolgreiche PhD-Abschlüsse von Martina Romio und Hartmut Popp
performance of two orthophosphate-based compounds: the olivine-related (Mg0.5Ni0.5)3(PO4)2 and the NASICON-Mg0.5Ti2(PO4)3. Furthermore, these studies focused on understanding the fundamental reactions between [...] der Queen Mary University of London am 15. Dezember, Popp bestand sein Rigorosum an der TU Graz am 3. Februar mit Auszeichnung. Martina Romios Dissertation hatte das “Development of Phosphate Materials [...] abundance of magnesium as well as its low toxicity, high theoretical volumetric capacity (3833 mA h cm­-3 for the Mg-anode), relatively low standard electrode potential (-2.37 V vs. standard hydrogen electrode)
-
Leitprojekt Digibus® Austria: Präsentation der Ergebnisse
wurden in einem ersten Schritt entsprechende Risikoanalysen erarbeitet, um dann in weiterer Folge ein 3D-Modell der Straßeninfrastruktur zu erstellen, das einerseits eine hohe geometrische Genauigkeit aufweisen
-
Milestone in sensor miniaturisation for eye diagnostics
coordinated by ams AG and running from 2016 to 2019, it has been possible for the first time to record 3D images of the retina in a living person using an extremely compact integrated spectrometer. The AIT [...] work? In this examination, a laser beam scans the retina and reconstructs the reflected light in a 3D image. This allows the doctor to examine the layers of the retina, some of which are only a few micrometres
-
3rd dHealth Pulse on April 13, 2021 - register now for free.
the event so you don't miss the dHealth Pulse! More information at: https://www.dhealth.at/dhealth-pulse-series/ The free dHealth Pulse lectures accompany the dHealth Conference (May 11-12) [...] The virtual dHealth Pulse series continues on Tuesday, April 13 from 5:00 to 6:30 p.m. - attendance is free! This time, it's all about telehealth systems. A prominent panel will present and discuss successful [...] Dieter Zenker (Medical Director HerzMobil Styria) DI Nikola Tanjga (ELGA GmbH) At the end of the dHealth pulse there will be a professional discussion with the speakers and questions from the audience
-
POLITICS MEETS SCIENCE ON TELEHEALTH IN AUSTRIA
ait.ac.at/fileadmin/cmc/downloads/PAs/2021/AIT_PA_2021_dHealth_Pulse-Telehealth.pdf dHealth 2021 and its Pulse event series From May 11 - 12, dHealth 2021 will take place - THE Austrian event for [...] on the topic of "navigating healthcare through challenging times". The new regular "dHealth Pulse" sessions extend the dHealth to the whole year and deal with the hot topics from digital health, AI in healthcare [...] On Tuesday evening, April 13, 2021, more than 80 participants virtually attended the third dHealth Pulse event - this time on the topic of "Telehealth Services - The Road to Standard Care". In one and
-
Agriculture 4.0: AIT and Lower Austria present new digitalisation initiative
Vienna, 21.04.2021. At 3 p.m. at Palais Lichtenstein, Lower Austria's Governor Johanna Mikl-Leitner and AIT Supervisory Board President Hannes Androsch, together with Lower Austria's Provincial Councillor [...] Bioresources Unit at the Center for Health & Bioresources in Tulln, announced the launch of the "d4agrotech" initiative. The joint goal is to enable the comprehensive collection and intelligent analysis [...] products, better environmental compatibility and a more sustainable circular economy possible. The "d4agrotech" initiative (data-driven and AI-based digital system solutions for sustainable agriculture
-
INLINE COMPUTATIONAL IMAGING
as of March 10th Bernhad Blaschitz presented the AIT single sensor technology for simultaneous 2D and 3D imaging namly ICI (Inline Computational Imaging). The system consists of any given industrial camera [...] camera and a special software module. The latter turns a series of camera images into enhanced 2D and 3D information. The AIT technology is used for challenging inline inspection tasks, where high acquisition
-
High speed inline imaging for optical surface metrology
Fast optical 3D inline inspection sensors are a powerful tool to advance factory automation. Many of these visual inspection tasks require high speeds, high resolutions, and repeatability. Stereo vision [...] applications. . The study has been recently published: “Experimental Comparison of Optical Inline 3D Measurement and Inspection Systems” IEEE Access, Volume 9 Page(s): 53952 - 53963 01.04. 2021
-
3D-Druck von Leichtmetallen: LKR leitet COMET-Projekt
Vor kurzem erfolgte das Kickoff für das COMET-Projekt „We3D“ (Wire-based additive manufacturing – materials and technologies – for 3D metal structures of the future). In den nächsten vier Jahren forscht [...] gefertigt werden. Im Rahmen des COMET-Projekts „We3D“ soll WAM nun entsprechend weiterentwickelt werden: Ziel der Forschungsvorhabens mit einem Gesamtvolumen von 5,3 Mio. Euro ist es, die Technologie für neue [...] WAM gilt als künftige Schlüsseltechnologie, bei der Schweißdrähte für den schichtweisen Aufbau großer 3D-Teile verwendet werden, die mit pulverbasierten AM-Technologien nicht hergestellt werden können. WAM
-
UAR Innovation Network 360°: LKR präsentiert Wire-based Additive Manufacturing
Fertigung“. Dabei wird es insbesondere um die Forschungsarbeit im COMET-Projekt We3D gehen, in dessen Rahmen der Draht-basierte 3D-Druck von Leichtmetallen entsprechend weiterentwickelt und auf eine neue Stufe
-
A new class of control units and robust environment perception for motor vehicles
or activate the parking assistant or pedestrian protection to avoid accidents. “We are researching 3d environmental detection, recognition, reconstruction and evaluation, as well as the development of
-
High-speed 3D inspection with any industrial camera
fields of applications. He will also address a recently published study comparing AIT ICI with other 3D imaging technologies on the market. The study showcases that the strengths of AIT Inline Computational
-
New method for standardization of "mini organs” Cooperation be
tissues or organs in their three-dimensional (3D) structure with cell culture models, so-called organoids or spheroids are produced from one or more cell types. The 3D structure and spatial arrangement of the
-
16th International A3PS Conference
On November 18th and 19th, 2021, the 16th International A3PS Conference will bring together leading representatives from industry, R&D and technology policy to discuss the actual development [...] action of A3PS and its partners in depth and in diversity. Venue: Gironcoli-Kristall | STRABAG Art Forum, Donau-City-Straße 9, 1220 Vienna Preliminary programme and registration: https://www.a3ps.at/kon [...] according to Life Cycle Assessments? This year's conference will celebrate the 15th anniversary of the A3PS. Founded in 2006, the platform successfully connected important mobility players, scientists, politicians
-
High-performance vision technologies for industrial quality control
is one of the best in the field of industrial inspection technologies. With xposure:photometry for 3D surface inspection - inline, with highest speed and precision - VAC convinced the jury. xposu [...] ICI:inspect Inline Computational Imaging (ICI) is an award-winning AIT technology for simultaneous 2D and 3D inspection - 40 million points per second - of moving objects. ICI:microscopy Due to [...] per second - of moving objects. TinyScan360° The revolutionary AIT 3D stereo - scanning system with a diameter of 3 mm is especially suitable for the measurement, visualization and modeling of
-
3D inline surface inspection with xposure:photometry
Automated optical surface inspection for quality control is an integral part of industrial manufacturing processes. The AIT Austrian Institute of Technology supports companies in being internationall
-
Expo Dubai 2020: AIT presents digital city planning know-how in the iLab
urban planning tools. Using augmented reality, real-time analyses and simulations can be experienced in 3D on an interactive platform. The CIL makes it possible to bring together the ideas of developers, investors
-
Wire-based additive manufacturing (WAM): Major research success for the LKR
actually not considered fusion-weldable and thus not WAM-processable, successfully using wire-based 3D printing and also achieving excellent mechanical properties. Al-Zn-Mg-Cu alloys are among the
-
COMBO3D: 3D printed tool for industrial manufacturing
COMBO3D (COmposite Mould Tool Based On 3D Printing) is a European joint project that demonstrates the possibility of 3D-printing an advanced thermoplastic composite molding tool using additive manufacturing [...] Fabricated by its project coordinator, Chair of Carbon Composites of Technical University of Munich, these 3D-printed advanced tools will be further used as resin transfer mold (RTM) tools for the production of [...] is on the optimal cooling channel design. As result, the world largest CFRP mono-block was 3D-printed as an RTM tool (fig.1) which uses LKR proposed counter-flow channels. To achieve a more homogeneous
-
3D Printed Blood Pumps
with heart failure. However, the production of blood pumps is complex and expensive. Project OPTIFLOW 3D PROFACTOR, the Medical University of Vienna, Bionic Surface Technologies GmbH, UpNano GmbH, Lithoz [...] possibility to specifically structure the surface to enable ideal biocompatibility. In the OPTIFLOW 3D project, which is funded by the FFG, various technically and medically unexplored approaches are being