-
Acoustics and Noise Abatement
- /en/solutions/acoustics-and-noise-abatement
road surfaces Simultaneous capturing and coupled modelling of road surface and tyre-road noise with a 3D surface texture scanner Analysis of the acoustic ageing behaviour of road surfaces How it works The [...] impact of the road surface on noise emission. This is achieved by means of simultaneous and accurate 3D road surface texture measurements. accredited testing - a central element of our service portfolio [...] German) Other Solutions Acoustic properties of road surfaces Optimization and testing of noise barriers 3D Road Texture Scanner Multifuntional Measurement Trailer Research Field Acoustics and Noise Abatement
-
So that the computer doesn't mistake a Chihuahua for a muffin
in manufacturing processes. It uses the natural transport motion of the object for simultaneous 2D and 3D surface detection under different viewing and illumination directions, mimicking human inspection
-
The smallest details displayed in a big way
This inline microscopic system, together with an image processing pipeline, delivers high-resolution 3D images at high speeds, by using a lateral transport stage changing the optical perspective. Scanning
-
A new class of control units and robust environment perception for motor vehicles
or activate the parking assistant or pedestrian protection to avoid accidents. “We are researching 3d environmental detection, recognition, reconstruction and evaluation, as well as the development of
-
PaveScan 4D
- /en/research-topics/road-condition-monitoring-assessments/projects/pavescan-4d
PaveScan 4D High-Density Pavement Scanning for Condition Monitoring of Roads In this project a mobile laser scanning system was developed that measures and analyses highly dense 3D profiles of complete [...] measurement techniques for 3D road profiling and pavement surface analysis, respectively, the former is typically performed by laser scanning devices that generate spatially referenced 3D point grids of the road
-
UAR Innovation Network 360°: LKR präsentiert Wire-based Additive Manufacturing
Fertigung“. Dabei wird es insbesondere um die Forschungsarbeit im COMET-Projekt We3D gehen, in dessen Rahmen der Draht-basierte 3D-Druck von Leichtmetallen entsprechend weiterentwickelt und auf eine neue Stufe
-
Robust 3D Mapping with Radar Sensors for Autonomous Vehicles and Robotic Systems
Recent advancements in 3D mapping technology are providing a fresh impetus to the realm of autonomous navigation. A noteworthy contribution in this domain originates from AIT researchers Philipp Glira [...] paper, titled "Robust 3D Mobile Mapping with Radar Sensors: A Real-Time Approach for Autonomous Navigation," introduces an innovative methodology for generating elevation maps from 3D radar point clouds tailored [...] autonomous vehicles, work machines, and other robotic systems. Demonstrating the feasibility of a coarse 3D reconstruction of the environment using radar sensor technology on mobile platforms, their findings
-
Decoding the 3D world: How Spatial Sensing and AI are Revolutionizing Robotics
and object manipulation might seem trivial to a human, however, automating these tasks within diverse 3D spaces and over time is still in the focus of today’s research. In his presentation, Beleznai discusses
-
Miniaturised 3D scanner
control, the high-performance stereoscopic 3D measuring system with a design diameter of 3 mm is particularly suitable for measuring, visualising and modelling (3D reconstruction) the smallest objects such [...] contribute to an accurate and comprehensive 3D model. With TinyScan360° it is possible to perform hand-held 3D surface measurements at a measurement distance of between 3 mm and 10 mm from the surface of the [...] The similarities between an autonomous excavator or forklift and the miniaturised 3D surface scanner TinyScan360°, developed by scientists at the Assistive & Autonomous Systems Research Group / AIT
-
3beLiEVe
- /en/research-topics/sustainable-smart-battery-manufacturing/projects/3believe
3beLiEVe Delivering the 3b-generation of LNMO cells for the xEV market of 2025 and beyond Strengthening the position of the European battery and automotive industry in the future xEV market 3beLiEVe aims [...] Union’s H2020 research and innovation programme under Grant Agreement no. 875033. Facts 3beLiEVe – Delivering the 3b-generation of LNMO cells for the xEV market of 2025 and beyond Programme: Horizon 2020 [...] will deliver two 12kWh-demonstrator battery packs at TRL6 and MRL8. These aim at demonstrating the 3beLiEVe technology performance for applications in light duty (i.e. passenger cars, freight vehicles)
-
3D4Bombardier
- /en/about-the-ait/center/center-for-vision-automation-control/assistive-autonomous-systems/projects/3d4bombardier-innovative-driver-assistance-system
3D4Bombardier In the future Bombardier trams will be capable of detecting obstacles and correctly assessing their danger potential. An optical AIT 3D sensor system specially developed for use with light [...] several years of AIT research on efficient algorithms for the evaluation of stereo imagery. The result is 3D sensors with very high spatial resolution that make it possible to accurately monitor the route ahead [...] shown that the system can automatically identify objects as obstacles and locate them accurately. The 3D stereo vision technology used is not only robust and insensitive to noise, but it also has long range
-
3D Printed Blood Pumps
with heart failure. However, the production of blood pumps is complex and expensive. Project OPTIFLOW 3D PROFACTOR, the Medical University of Vienna, Bionic Surface Technologies GmbH, UpNano GmbH, Lithoz [...] possibility to specifically structure the surface to enable ideal biocompatibility. In the OPTIFLOW 3D project, which is funded by the FFG, various technically and medically unexplored approaches are being
-
COMBO3D
- /en/research-topics/numerical-process-simulation/projects/combo3d
COMBO3D COmposite Mould Tool Based On 3D Printing Fig. 1: 3D-printed CFRP mono-block © Lehrstuhl für Carbon Composites, TUM COMBO3D (COmposite Mould Tool Based On 3D Printing) is a European joint project [...] guarantee the temperature homogeneity in the RTM method. Facts COMBO3D – COmposite Mould Tool Based On 3D Printing Programme: H2020-EU.3.4.5.4. - ITD Airframe, Clean Sky 2 Joint Undertaking Funding agency: [...] project that demonstrates the possibility of 3D-printing an advanced thermoplastic composite molding tool using additive manufacturing . Fabricated by its project coordinator, Chair of Carbon Composites of
-
COMBO3D: 3D printed tool for industrial manufacturing
COMBO3D (COmposite Mould Tool Based On 3D Printing) is a European joint project that demonstrates the possibility of 3D-printing an advanced thermoplastic composite molding tool using additive manufacturing [...] Fabricated by its project coordinator, Chair of Carbon Composites of Technical University of Munich, these 3D-printed advanced tools will be further used as resin transfer mold (RTM) tools for the production of [...] is on the optimal cooling channel design. As result, the world largest CFRP mono-block was 3D-printed as an RTM tool (fig.1) which uses LKR proposed counter-flow channels. To achieve a more homogeneous
-
VALU3S
- /en/research-topics/dependable-systems-engineering/projects/valu3s
VALU3S (Experimental) Verification and validation of automated systems against common requirements such as safety, security, and privacy, using a layered test framework. Manufacturers of automated systems [...] systems and their components have been allocating an enormous amount of time and effort in R&D activities for developing new technologies and systems. Those innovations translate into an overhead on the V&V [...] reliably. This process is currently very time-consuming and thereby costly. The ECSEL JU project VALU3S (“Verification and Validation of Automated Systems’ Safety and Security”) aims to evaluate the sta
-
FiBack3
- /en/research-topics/dependable-systems-engineering/projects/fiback3
FiBack3 Increasing the security of devices procured by BMLV (embedded systems) by examining binary files for backdoors. A large part of the critical IT infrastructure and IoT devices used by the BMLV is [...] is manufactured outside of Austria and Europe. The FiBack3 project, which is being carried out as part of the FFG funding program FORTE (2020), aims at the (partly) automated analysis of this more critical [...] manufacturer. Until now, such an analysis was largely manual and therefore very time-consuming. FiBack3 will increase automation of this process, from firmware extraction to backdoor detection, and thus create
-
3D inline surface inspection with xposure:photometry
Automated optical surface inspection for quality control is an integral part of industrial manufacturing processes. The AIT Austrian Institute of Technology supports companies in being internationall
-
3D-Druck von Leichtmetallen: LKR leitet COMET-Projekt
Vor kurzem erfolgte das Kickoff für das COMET-Projekt „We3D“ (Wire-based additive manufacturing – materials and technologies – for 3D metal structures of the future). In den nächsten vier Jahren forscht [...] gefertigt werden. Im Rahmen des COMET-Projekts „We3D“ soll WAM nun entsprechend weiterentwickelt werden: Ziel der Forschungsvorhabens mit einem Gesamtvolumen von 5,3 Mio. Euro ist es, die Technologie für neue [...] WAM gilt als künftige Schlüsseltechnologie, bei der Schweißdrähte für den schichtweisen Aufbau großer 3D-Teile verwendet werden, die mit pulverbasierten AM-Technologien nicht hergestellt werden können. WAM
-
We3D
- /en/research-topics/wire-based-additive-manufacturing/projects/we3d
We3D Light metal components from the 3D printer With the funding commitment for the COMET project "We3D" (Wire-based additive manufacturing – materials and technologies – for 3D metal structures of the [...] processed. We3D: Next generation additive manufacturing Wire-based Additive Manufacturing (WAM) is regarded as a key future technology, using welding wires for the layer-by-layer manufacturing of large 3D parts [...] the framework of the COMET project "We3D", WAM will now be further developed accordingly: The aim of the research project with a total volume of approximately 5.3 million euros is to further develop the
-
High-speed 3D inspection with any industrial camera
fields of applications. He will also address a recently published study comparing AIT ICI with other 3D imaging technologies on the market. The study showcases that the strengths of AIT Inline Computational
Searched for "3d".
Found 249 results in 34 milliseconds.
Displaying results 161 to 180 of 249.