-
Corrosive Atmospheres
- /en/labs/environmental-testing-lab/corrosive-atmospheres
salt spray tests MIL-STD-883E: Test Method Standard, Microcircuits Corrosive gas IEC 60068-2-42: Environmental Testing: Test Kc: sulphur dioxide test IEC 60068-2-43: Environmental Testing: Test Kd: hydrogen [...] Method of Salt Spray (Fog) Testing IEC 60068-2-11:Environmental Testing: Test Ka: salt mist IEC 60068-2-52: Environmental Testing: Test Kb: salt mist, cyclic ISO 9227: Corrosion tests in artificial atmospheres [...] photovoltaic modules Our Services Salt spray test Corrosive gas test in SO 2 und H 2 S Climate chamber with harmful gas cell Testing Equipment Salt chamber Test space: l=165 cm, w=120 cm, d=57 cm Temperature
-
DC laboratory
- /en/solutions/power-system-technologies/high-voltage-and-high-power/dc-laboratory
Dielectric Testing Insulation systems are tested for voltage withstand capability to ensure safety and reliability in high-voltage systems. Thermal Testing and Continuous Current Testing These tests evaluate [...] ge testing: High-Current Testing DC Testing Voltages: 0.1 to 4 kV Power Capacity: Up to 75 MW Current Capacity: Up to 80 kA High-Voltage Testing High Voltage: Up to 6 kV DC Impulse Voltage Testing: Up [...] capacity demands. The laboratory tests these devices under realistic operating conditions and short-circuit events. Short-Time Current and Impulse Current Testing These tests simulate extreme loads to ensure
-
Heat - Cold - Climate
- /en/labs/environmental-testing-lab/heat-cold-climate
Environmental Testing: Test A: cold IEC 60068-2-2: Environmental Testing: Test B: dry heat IEC 60068-2-14: Environmental Testing: Test N: change of temp. IEC 60068-2-30: Environmental Testing: Test Db: damp [...] Environmental Testing: Test Z/AD: composite, temperature/humidity, cyclic test IEC 60068-2-61: Environmental Testing: Test Z/ABDM: climatic sequence IEC 60068-2-78: Environmental Testing: Test Cab: damp heat [...] line construction Our Services High temperature tests up to +250 °C Low temperature tests up to -75 °C Dew point tests from -3°C to 94 °C Climate tests: 10 % r.F up to 95 % r.F Temperature range 10 °C
-
Ice - Snow - Weathering
- /en/labs/environmental-testing-lab/ice-snow-weathering
60068-2-13: Environmental Testing: Test M: low air pressure IEC 60068-2-40: Environmental Testing: Test Z/AM: combined cold/ low air pressure tests IEC 60068-2-41: Environmental Testing: Test Z/BM: combined dry [...] air pressure tests IEC 60749: Semiconductor Devices - Mechanical and climatic test methods MIL-STD-810F: Test Method Standard for Environmental Engineering Considerations and Laboratory Tests [...] ry testing of photovoltaic modules Our Services Analysis of samples under extreme weather conditions: Rain Snow Hail Freezing Wind Expert reports and certificates Rain / Ice / Snow Chamber Testing Equipment
-
SmartEST Lab
- /en/labs/smartest-lab
PERFORMANCE AND LOAD TESTS Continuous performance tests: The inverter is operated at maximum power over an extended period to test thermal stability and load capacity. Overload capability: Testing the behaviour [...] In specialised test chambers, devices can be tested under extreme temperature conditions and varying humidity levels. This is ideal for accelerated lifetime testing. Temperature tests: Operation under [...] 60 x 2.80 m can be tested. What is the maximum weight of the test specimen? This depends on the installation location—10 tonnes outside the test chamber and 3 tonnes inside the test chamber. Akkreditierung
-
Battery Energy Storage System and (PV) inverter testing
- /en/solutions/power-system-technologies/battery-energy-storage-system-and-pv-inverter-testing
for PV storage systems EMC testing, immunity testing, safety testing and fault analysis of relevant power conversion system components Cell and Battery Accredited testing of electrical, mechanical, [...] General requirements and methods of test - Part 2: On-grid applications or/ and to the test procedures of the BVES/BSW Efficiency guideline for PV storage systems (Battery test is applicable for all types of [...] & Controls ICT Interoperability testing (e.g. on SunSpec compliance) End-to-end functionality tests from communication interface to power interface Integration tests with external third-party devices
-
Mechanical Materials Testing
- /en/labs/material-testing-and-characterisation/mechanical-materials-testing
Next Technical Data Test Procedure Performance Parameters Application Tensile/compression/bending test Accuracy class ≤ 0.5 0 to 250kN Test room: 600x2000mm R/N value determination Test speeds up to 2500 [...] determination Testing of components Tensile/compression/bending test at reduced/elevated temperature Accuracy class 1.0 -160°C to +300°C (+/–5°C) - during tensile test 0 to 250kN Testing of materials and [...] Materials Testing Cornerstone of Structural Materials Determination of stiffness and resilience of materials Our services Tensile testing acc. to EN 6892-1 Strain and tension-controlled tensile test Compression
-
High Voltage and High Power Laboratory
- /en/solutions/power-system-technologies-development-validation/high-voltage-and-high-power-laboratory-1
Dielectric Testing Insulation systems in AC equipment are tested for voltage withstand capability to ensure safety in high-voltage networks. Thermal Testing and Continuous Current Testing These tests assess [...] supply. Testing Services at the AIT AC Laboratory The AIT AC Laboratory offers specialized testing procedures tailored to the demands of modern alternating current (AC) technologies. Each test is customized [...] short-circuit events. The laboratory tests switching devices and protection systems under realistic conditions to verify their durability. Impulse Current Testing These tests simulate extreme current surges
-
Shaker
- /en/solutions/reliable-transport-infrastructure/vibes/shaker
chamber Accredited test center for shock and vibration tests Services Selection of test methods Creation of practice-oriented test plans Execution of the tests Performance of acceptance tests Support in product [...] customers in the selection of test methods, offer competent and customer-oriented testing and issue accredited test certificates. Shock tests with maximum acceleration 100 g Shaker tests at AIT Vibration: Sine [...] Shaker Shock and vibration tests The AIT Austrian Institute of Technology has many years of know-how as an independent testing laboratory for shock and vibration tests and environmental simulations accredited
-
Quality assurance and testing of PV modules
- /en/solutions/photovoltaic-modules-power-plants/laboratories
than 5 % . Test examples: Snow loads: Modules are tested with a load corresponding to ½ meter of granular snow. Wind loads : Tests at speeds of up to 180 km/h. 2. module breakage test These tests are similar [...] Accelerated ageing tests Long-term UV simulation (e.g. 25 years) Dynamic mechanical load tests Ammonia corrosion test Salt spray corrosion testing Methods for detecting PID and LeTID Tests and certifications [...] potential weaknesses at an early stage. Our test procedures in detail: 1. static mechanical load testing The load test simulates snow and wind loads to test the resistance of the modules. This ensures
-
Shock and vibration testing of components
- /en/labs/shock-and-vibration-testing-of-components
chamber Accredited test center for shock and vibration tests Services Selection of test methods Creation of practice-oriented test plans Execution of the tests Performance of approval tests Support in product [...] our customers in the selection of test methods, offer competent and customer-oriented testing and issue accredited test certificates. SHOCK TESTS UP TO 100 G Shaker tests at AIT Vibration: Sine and broadband [...] Shock and vibration testing of components The AIT Austrian Institute of Technology has many years of know-how as an independent testing laboratory for shock and vibration tests and environmental simulations
-
ITC-Press SP 225
- /en/labs/itc-press-sp-225
forming tests and component testing of ductile metal sheets Our Services: Swift test (Cupping test) Bulge-test (Determination of flow curves) Nakajima-tests (forming limit curves) 3-point bending test Axial
-
Automated Test Case Generation
- /en/research-topics/dependable-systems-engineering/verification-validation/automated-test-case-generation
Automated Test Case Generation Automated Test Case Generation Model-based test case generation (MBTCG) is about automatically generating test cases from a computer readable specification. Its advantages [...] automation of the test-design process with upsides such as a guaranteed specification coverage and automatic test-case/requirement tracing. In addition to providing efficient and effective tests, the technique [...] Services TCG as a service Tools Tool adaptions Domain Specific Language development and test case generation support Test model development support TCG for model development environments × Kontakt Formular
-
Fatigue Strength Testing
- /en/labs/material-testing-and-characterisation/fatigue-strength-testing
samples, components Short test duration thanks to resonator testing machine (RUMUL Testronic) Detection of hardening and softening behaviour during the individual tests Tests at room and increased temperature [...] failure in real life application High testing frequency (80 Hz) Flexibility regarding sample geometry, load condition, material Pendulum machine Our services Fatigue testing and Wöhler curves of standard and [...] at freely selectable load levels (tension/compression) Technical Data Test Procedure Performance Parameters Application Fatigue test in the range of high cycle and long life fatigue Standard samples and
-
Low Pressure
- /en/labs/environmental-testing-lab/low-pressure
STANDARDS IEC 60068-2-13: Environmental Testing: Test M: low air pressure IEC 60749: Semiconductor Devices - Mechanical and climatic test methods MIL-STD-810F: Test Method Standard for Environmental Engineering [...] spacecraft) Our Services Low pressure (flight test, alpine test, etc.) Testing Equipment Low Pressure Chamber (walk-in) Size of chamber: 1,2 m x 1,2 m x 2,3 m Pressure: 1 mbar up to 1300 mbar × Kontakt [...] Low Pressure Vacuum Chamber Applications Materials testing Electronic and electrical components, machines and devices Mechanical constructions and structures Vehicle parts (automobiles, aircraft and s
-
Shock and vibration testing of components
- /en/research-topics/structural-dynamics-and-assessment/laboratories/shock-and-vibration-testing-of-components
chamber Accredited test center for shock and vibration tests Services Selection of test methods Creation of practice-oriented test plans Execution of the tests Performance of approval tests Support in product [...] customers in the selection of test methods, offer competent and customer-oriented testing and issue accredited test certificates. NEW SINCE 2018: SHOCK TESTS UP TO 100 G Shaker tests at AIT Vibration: Sine and [...] Shock and vibration testing of components Shock and vibration testing of components The AIT Austrian Institute of Technology has many years of know-how as an independent testing laboratory for shock and
-
High Voltage and High Power
- /en/solutions/power-system-technologies/high-voltage-and-high-power
measurement services: Testing switching capabilities under operational and short-circuit conditions Short-term current and impulse current testing Arc fault testing Thermal testing to assess thermal stress Evaluation [...] heat rise testing of components and systems for electrical energy applications. Learn more about heating rise testing Laboratories Laboratory High voltage and high power laboratory and testing Laboratory [...] energy systems. Testing and Certification Services for Electrical Components and Systems To ensure the safety and reliability of your electrical installations, we offer a wide range of testing and measurement
-
Stationary Storage Development
- /en/solutions/power-system-technologies/stationary-storage-development
including: ICT interoperability testing Accelerated aging tests to ensure system performance and safety Customized performance and safety tests ICT & Control Systems Design, testing, and implementation of control [...] path integration testing Field monitoring of controller prototypes Acceptance Testing AIT offers comprehensive tests to validate defined specifications, including: Factory acceptance testing and witnessing [...] EMC tests, immunity tests, safety assessments, and fault analysis of PCS components ICT & Control Systems: ICT interoperability testing (e.g., SunSpec compliance) End-to-end functionality testing from
-
Material Testing and Characterisation
- /en/labs/material-testing-and-characterisation
contaminations Read more Analysis and test methods Materialography Spectrometry Dilatometer Pendulum impact test Deformation analysis mechanical material testing fatigue testing Metallography DSC electron microscopy [...] characterization procedures. Mechanical Materials Testing tensile testing machine ZWICK 100 kN tensile testing machine ZWICK 250 kN Pendulum machine Hardness tester for Brinell Vickers & Rockwell Read more [...] al Scanning Calorimetry Read more Fatigue Strength Testing Fracture mechanics and fatique behaviour Resonant testing machine 100 kN Resonant testing machine 20 kN Pendulum machine HIT25P Read more Met
-
Thermal Shock
- /en/labs/environmental-testing-lab/thermal-shock
Temperatur-shock Test Chamber Applications Materials testing Electronic and electrical components and devices Our Services Rapid change between 2 temperatures (thermal shock) in air Testing Equipment Thermal [...] it.ac.at Standards IEC 60068-2-14: Environmental Testing: Test N: Change of temperature IEC 60749: Semiconductor devices - Mechanical and climatic test methods [...] Thermal shock with two test chambers High Temperature Chamber up to +220 °C Low Temperature Chamber down to -80 °C Capacity of the chambers: 47 x 65 x 41 cm Max. weight of sample: 20 kg Transfer time: < 10
Searched for "test".
Found 561 results in 26 milliseconds.
Displaying results 1 to 20 of 561.