Inhaltstyp
Kategorien
-
PV-SÜD
- /en/research-topics/acoustics-and-noise-abatement-in-the-transport-sector/projects/pv-sued
of solar energy in the road infrastructure Energy conversion through photovoltaics (PV) is one of the key technologies for increasing the share of renewable energy sources in primary energy production [...] research areas. With the Competence Unit Photovoltaic Systems of the AIT Center for Energy and Fraunhofer Institute for Solar Energy Systems, two leading research institutes in the field of photovoltaics in Austria [...] available within the high-level road network, they have hitherto only been considered for photovoltaic energy generation to a very limited extent. Although the technical feasibility of PV installations in the
-
ORCHESTRA
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/orchestra
machinery, power management and control, wiring harness solutions, thermal management, electrical energy storage, experimental and virtual testing, and system integration. The consortium partners from academia
-
ZDM
- /en/research-topics/forming-technologies/projects/zdm
to improve production processes in terms of performance indicators such as quality (scrap rate), energy consumption, and productivity by integrating information from sensors, simulation, and other production [...] Master thesis, TU Vienna, 2020. Funded by the Federal Ministry for Climate Protection, Environment, Energy, Mobility, Innovation and Technology (BMK) and the Austrian Research Promotion Agency (FFG). × Kontakt
-
JOICE
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/joice
https://www.project-joice.com/ Funded by the Federal Ministry for Climate Protection, Environment, Energy, Mobility, Innovation and Technology (BMK) and the Austrian Research Promotion Agency (FFG). × Kontakt
-
LOM-Ice
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/lom-ice
snow testing and simulation. Funded by the Federal Ministry for Climate Protection, Environment, Energy, Mobility, Innovation and Technology (BMK) and the Austrian Research Promotion Agency (FFG). × Kontakt
-
SELECT
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/select
ic air taxis poses challenges in the areas of flight safety in a wide range of icing conditions, energy efficiency, performance, and noise emissions. The aim of SELECT is to develop advanced surface t [...] calculation results for an aerofoil Funded by the Federal Ministry for Climate Protection, Environment, Energy, Mobility, Innovation and Technology (BMK) and the Austrian Research Promotion Agency (FFG). × Kontakt
-
OLGA
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/olga
efficient and carbon neutral airport and airline operations, enabling sustainable logistics, smart energy & mobility, intramodality for passengers and freight, performing emission/air quality assessments
-
Data-T-Rex
- /en/research-topics/forming-technologies/projects/data-t-rex
resulting optimisation of manufacturing processes can achieve an avoidance of production waste and save energy. Project manager Carina Schlögl from the LKR: "Sustainable optimisations in metal processing are
-
Pro-Imagine
- /en/research-topics/forming-technologies/projects/pro-imagine
steadily growing energy consumption and CO2 emissions. In Europe, the mobility sector is responsible for almost 30% of total final energy consumption, making it the largest single energy consumer. The goal [...] on using magnesium offers significant potential for energy savings in operational use. Magnesium (Mg) can be obtained relatively cleanly and energy-efficiently from raw materials that are readily available [...] application, while at the same time achieving significant energy savings. Funded by the Federal Ministry for Climate Protection, Environment, Energy, Mobility, Innovation and Technology (BMK) and the Austrian
-
Sustainable & Smart Battery Manufacturing
- /en/research-topics/sustainable-smart-battery-manufacturing
t and optimization with special focus on solvent-reduced water-based processing State-of-the-art energy-efficient cell assembly under dry room conditions Materials and components validation and prototyping
-
Solid State Batteries
- /en/research-topics/solid-state-batteries
materials of generation 3b (e.g., Nickel Manganese Cobalt oxide NMC) is necessary to achieve the desired energy density targets. Reproducible processing of cell components into multi-layer pouch cells . Apart
-
IntelLiGent
- /en/research-topics/sustainable-smart-battery-manufacturing/projects/intelligent
like energy density, cycle life, fast charging capacity while maintaining low-cost batteries are tackled with well-matched objectives: Optimized high voltage electrodes will enable high energy density
-
NoVOC
- /en/research-topics/sustainable-smart-battery-manufacturing/projects/novoc
Universitātes Cietvielu fizikas institūts (Latvia) Avesta Battery and Energy Engineering (Belgium) Commissariat à l’énergie atomique et aux énergies alternatives (France) Customcells Holding GmbH (Germany) VARTA [...] cell manufacturing in Europe New sustainable electrode and cell manufacturing techniques with low energy consumption, and no Volatile Organic Compounds (VOCs) emissions Elimination of organic solvents in
-
opt1mus
- /en/research-topics/numerical-simulation/projects/opt1mus
components. At the same time, their production and processing require high amounts of energy. However, the energy efficiency of these processes can be greatly improved by establishing cyber physical systems [...] these trials can be carried out virtually using digital twins of production plants. This saves time, energy and avoids dangerous working conditions when testing new alloys or developing new processes. Despite [...] work through digital assistance. Funded by the Federal Ministry for Climate Protection, Environment, Energy, Mobility, Innovation and Technology (BMK) and the Austrian Research Promotion Agency (FFG) as part
-
PULSELiON
- /en/themen/solid-state-batteries/projects/pulselion
Sweden / Coordinator Avesta Battery and Energy Engineering (ABEE) Centro Ricerche Fiat S.C.p.A. (CRF) University of Ljubljana LRCS (CNRS/UPJV) Pulsedeon OY CIC energiGUNE Universitat Politècnica de València [...] high-performing batteries. Development of solid-state battery technologies could markedly improve the energy density and safety of lithium metal batteries. Mass manufacturing of solid-state batteries is still [...] of the PULSELION project relates to a solid-state battery with a sulfide-based electrolyte, high energy density cathode materials, and advanced lithium metal anode. The AIT experts will use their expertise
-
COUNT
- /en/research-topics/structural-dynamics-and-assessment/projects/count
Gasser, project manager at AIT. Funded by the Federal Ministry for Climate Protection, Environment, Energy, Mobility, Innovation and Technology (BMK) and the Austrian Research Promotion Agency (FFG). × Kontakt
-
DISCO2030
- /en/research-topics/wire-based-additive-manufacturing/projects/disco2030
based on additive manufacturing (AM) technologies from the new Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) technology families. DISCO2030 combines the advantages of PBF and DED to enable
-
LH2-WAM-Tank
- /en/research-topics/wire-based-additive-manufacturing/projects/lh2-wam-tank
material to reduce weight and significantly increase gravimetric storage density in order to reach an energy-technically reasonable level. New LH2 tank concepts in combination with innovative manufacturing
-
AMIGOS
- /en/research-topics/road-safety-accident-research/projects/amigos
Green and Safe City Solutions To achieve CO2 neutrality, cities need to develop new, tailor-made energy concepts for urban transport that rely on emission-free and active forms of mobility. The acceptance
-
SUBLIME
- /en/themen/solid-state-batteries/projects/sublime
beutl(at)ait.ac.at Project partners FEV Europe GmbH (Coordinator) Avesta Battery and Energy Engineering CIC energiGUNE Ford Otomotiv Sanayi Anonim Sirketi Centro Ricerche FIAT SCPA MIMITech GmbH Politecnico [...] testing, for novel sulfide electrolyte-based solid-state battery cells with increased charge and energy densities. Embracing cutting-edge high-capacity and high-voltage electrode materials, the proposed