Search

Corrosive Atmospheres

/en/labs/environmental-testing-lab/corrosive-atmospheres

salt spray tests MIL-STD-883E: Test Method Standard, Microcircuits Corrosive gas IEC 60068-2-42: Environmental Testing: Test Kc: sulphur dioxide test IEC 60068-2-43: Environmental Testing: Test Kd: hydrogen [...] Method of Salt Spray (Fog) Testing IEC 60068-2-11:Environmental Testing: Test Ka: salt mist IEC 60068-2-52: Environmental Testing: Test Kb: salt mist, cyclic ISO 9227: Corrosion tests in artificial atmospheres [...] photovoltaic modules Our Services Salt spray test Corrosive gas test in SO 2 und H 2 S Climate chamber with harmful gas cell Testing Equipment Salt chamber Test space: l=165 cm, w=120 cm, d=57 cm Temperature

Relevance:

100%

Quenching and deformation dilatometer

/en/labs/quenching-and-deformation-dilatometer

Quenching and deformation dilatometer Tension and compression tests with a programmable heat treatment and forming unit Our Services Determination of flow curves under tensile and compressive load for

Relevance:

58%

IP-Protection Class - Dust

/en/labs/environmental-testing-lab/ip-protection-class-dust

spacecrafts) Sand storm tests of photovoltaic modules Our Services IP classification Testing and assessment for all enclosure protection levels Dust Chamber EN 60529 Testing Equipment Dust Chamber Dust:

Relevance:

83%

IP-Protection Class - Water

/en/labs/environmental-testing-lab/ip-protection-class-water

spacecrafts) Our Services IP classification Testing and assessment for all enclosure protection levels Dripping Water Test Testing Equipment Water Protection Tests Spray water dripping water water jet propulsion [...] IP-Protection Class - Water Spray Water Test Applications Electronic and electrical components, machines and devices Machines and technical facilities Mechanical constructions, drives and superstructures

Relevance:

91%

ITC-Presse SP 225 (Interlaken)

/en/laboratories/itc-presse-sp-225-interlaken

Umformversuche und Bauteilprüfung duktiler Metallbleche Unsere Leistungen Swift-Test (Näpfchenziehversuche) Bulge-Test (Fließkurvenermittlung) Nakajima-Prüfung (Grenzformänderungskurve) 3-Punkt Biegeversuch

Relevance:

84%

Environmental Testing Laboratory

/en/labs/environmental-testing-lab

Services Consulting and selection of test methods Practice oriented test planning Conducting of the tests Conducting of acceptance tests Long-term and life cycle tests Reports and certificates Heat - Cold [...] Climate Test Chamber Read more Mechanical Load Pneumatic test stand with 30 push / pull punches Read more Ice - Snow - Weathering Water test (indoor/outdoor) Ice/Snow/Climate Chamber Hail test stand 25mm [...] Environmental Testing Laboratory Our experienced experts are active in both Austrian and international standards boards, forming a link between standards theory and testing practice. The competitive edge

Relevance:

95%

Heat - Cold - Climate

/en/labs/environmental-testing-lab/heat-cold-climate

Environmental Testing: Test A: cold IEC 60068-2-2: Environmental Testing: Test B: dry heat IEC 60068-2-14: Environmental Testing: Test N: change of temp. IEC 60068-2-30: Environmental Testing: Test Db: damp [...] Environmental Testing: Test Z/AD: composite, temperature/humidity, cyclic test IEC 60068-2-61: Environmental Testing: Test Z/ABDM: climatic sequence IEC 60068-2-78: Environmental Testing: Test Cab: damp heat [...] line construction Our Services High temperature tests up to +250 °C Low temperature tests up to -75 °C Dew point tests from -3°C to 94 °C Climate tests: 10 % r.F up to 95 % r.F Temperature range 10 °C

Relevance:

99%

Post-Mortem-Analysis

/en/labs/post-mortem-analysis

determine the specific surface area Impedance spectroscopic investigations on battery cells Ageing tests under climatic conditions Research Overview Battery Technologies × Kontakt Formular Pflichtfelder

Relevance:

55%

Ice - Snow - Weathering

/en/labs/environmental-testing-lab/ice-snow-weathering

60068-2-13: Environmental Testing: Test M: low air pressure IEC 60068-2-40: Environmental Testing: Test Z/AM: combined cold/ low air pressure tests IEC 60068-2-41: Environmental Testing: Test Z/BM: combined dry [...] air pressure tests IEC 60749: Semiconductor Devices - Mechanical and climatic test methods MIL-STD-810F: Test Method Standard for Environmental Engineering Considerations and Laboratory Tests [...] ry testing of photovoltaic modules Our Services Analysis of samples under extreme weather conditions: Rain Snow Hail Freezing Wind Expert reports and certificates Rain / Ice / Snow Chamber Testing Equipment

Relevance:

99%

Battery diagnostics

/en/labs/battery-diagnostics

Battery diagnostics Electrical testing of cells under normal and abusive conditions (rapid charge/overcharge tests or forced discharge, cycle tests, nail penetration test) Structural changes of the electrode [...] Electrical tests on cell, module and system level under controlled environmental conditions and operating states (cooling circuit, BMS, etc.) Electrical, mechanical and thermal safety tests at cell level

Relevance:

92%

Thermal Shock

/en/labs/environmental-testing-lab/thermal-shock

Temperatur-shock Test Chamber Applications Materials testing Electronic and electrical components and devices Our Services Rapid change between 2 temperatures (thermal shock) in air Testing Equipment Thermal [...] it.ac.at Standards IEC 60068-2-14: Environmental Testing: Test N: Change of temperature IEC 60749: Semiconductor devices - Mechanical and climatic test methods [...] Thermal shock with two test chambers High Temperature Chamber up to +220 °C Low Temperature Chamber down to -80 °C Capacity of the chambers: 47 x 65 x 41 cm Max. weight of sample: 20 kg Transfer time: < 10

Relevance:

96%

Low Pressure

/en/labs/environmental-testing-lab/low-pressure

STANDARDS IEC 60068-2-13: Environmental Testing: Test M: low air pressure IEC 60749: Semiconductor Devices - Mechanical and climatic test methods MIL-STD-810F: Test Method Standard for Environmental Engineering [...] spacecraft) Our Services Low pressure (flight test, alpine test, etc.) Testing Equipment Low Pressure Chamber (walk-in) Size of chamber: 1,2 m x 1,2 m x 2,3 m Pressure: 1 mbar up to 1300 mbar × Kontakt [...] Low Pressure Vacuum Chamber Applications Materials testing Electronic and electrical components, machines and devices Mechanical constructions and structures Vehicle parts (automobiles, aircraft and s

Relevance:

97%

Mechanical Load

/en/labs/environmental-testing-lab/mechanical-load

pressure load Dynamic tensile and pressure load Test pressure up to 10,000 Pa (N / m²) Up to 3 cycles / min Bis zu 3 Zyklen/min Testing Equipment Pneumatic test stand with 30 push / pull punches Measurement [...] Standards MQT16 IEC 61215-2: Static mechanical load test MST34 IEC 61730-2: Mechanical load test IEC TS 62782: Cyclic (dynamic) mechanical load testing [...] Mechanical Load Mechanical Load Test Applications Simulation of wind and snow loads: PV modules, solar panels Building integrated PV elements facade elements Construction parts, superstructures, vehicle

Relevance:

95%

Electrode Preparation and Cell Production

/en/labs/cell-production

Next Applications Cell development Component tests Prototype production Smart Cells with integrated sensor technology Battery tests Safety tests Electrical tests according to accredited standards and individual

Relevance:

79%

Materials characterization

/en/labs/materials-characterization

Competence Unit Battery Technologies +43 50550-6661 +43 50550-6595 marcus.jahn(at)ait.ac.at Accredited testing laboratory according to ISO 17025 Industrial Raw Materials Minerals & Ores Rocks, Soils & Sediments [...] of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010) EN 1097-6: Test methods for mechanical and physical properties of aggregates - Part 6: Determination of bulk density

Relevance:

67%

250 t Press SDZP 250 1200 x 900

/en/labs/250-t-press-sdzp-250-1200-x-900

Addressing sheet metal forming issues Manufacturing of demonstrators and testing of industry-grade sheet metal structures Testing to improve formability particularly of high-strength aluminum alloys Technical

Relevance:

78%

Shock and vibration testing of components

/en/labs/shock-and-vibration-testing-of-components

chamber Accredited test center for shock and vibration tests Services Selection of test methods Creation of practice-oriented test plans Execution of the tests Performance of approval tests Support in product [...] our customers in the selection of test methods, offer competent and customer-oriented testing and issue accredited test certificates. SHOCK TESTS UP TO 100 G Shaker tests at AIT Vibration: Sine and broadband [...] Shock and vibration testing of components The AIT Austrian Institute of Technology has many years of know-how as an independent testing laboratory for shock and vibration tests and environmental simulations

Relevance:

98%

Technology Experience Lab

/en/technology-experience-lab

collaborative work setups. Additionally, it can be used for parallelized QoE testing and interactive multiparty QoE testing in conjunction with the context lab. Control Room Control Room The Control Room

Relevance:

67%

Vertical continuous casting plant

/en/labs/vertical-continuous-casting-plant

direct processing of the semi-finished products (e.g. forging) Infrastructure for extended casting tests including peripheral equipment Technical Data manufacturer HPI - High Performance Industries furnace

Relevance:

51%

Heat Treatments

/en/labs/heat-treatments

Artificial ageing furnace (Fa. Vötsch Industrietechnik) Max. temperature: 250°C Climatic chamber Corrosion test Modification humidity Modification temperature Water bath (Fa. Haake) Oil bath (Fa. Haake) Device

Relevance:

55%

Inhaltstyp

Kategorien

Sort by